Marcello <3 Bronzo Strap 26/22 "Historico" OEM Buckle

Description

Designed for the PAM00968 Submersible Bronzo. Upon sourcing this ultra-soft, combination-tanned hide directly from Italy, the nostalgic olive-brown tone and substantial temper immediately recalled the highly coveted archival straps of classic Panerai era. The leather is so exceptional that I prioritized several personal pieces before opening this limited run. Due to the extreme scarcity of this specific Italian hide, only a few bespoke units will be crafted before this material is gone forever.

Crafted specifically to complement the substantial geometry of 47mm Panerai Submersible cases, this strap features a classic 26mm to 22mm taper. The aggressive 26mm width at the lugs ensures a commanding, seamless fit against the massive bronze casing, while tapering down to 22mm at the buckle to maintain exceptional comfort on the wrist.

• The Build: A tapered 26mm/22mm profile crafted to a substantial ~3.3mm thickness—providing a robust, high-end feel built to balance larger-format Panerai cases.

• The Stitching: Hand-stitched in a traditional boxed pattern using a high-tensile brown thread specifically selected to complement the rich brown ceramic bezel of the PAM00968 Bronzo. This tone-on-tone pairing creates a cohesive, ultra-refined look that elevates the warmth of the aging bronze.

• Refined Edges: I hand-apply a precise, sharp crease along every edge and leave the keepers clean to mirror the minimalist elegance of high-end Italian leatherwork.

• Hardware: Crafted to utilize your original 22mm OEM Panerai buckle (such as the titanium or bronze pin buckles paired with the PAM00968 series). No hardware is included by default, preserving the authenticity of your original setup. If you need a polished, brushed or PVD buckle, you may select it from the drop down menu.

Technical Specifications:

• Construction: 26mm lug width tapering down to 22mm buckle width.

• Compatibility: Designed to fit your original 22mm Panerai buckle. I precision-cut the pin holes to perfectly accept OEM Panerai buckle tongues.

• Availability: Strictly limited. Because of the scarce supply of this Italian hide batch, I can craft only a small number of units.

Included:  Watch strap, optional buckle, one wooden box with papers.

To view more 26mm Panerai Bronzo straps, click here.

—————————————

Additional Information: Each Panerai model demands its own approach to strap design. When it comes to the Panerai Bronzo and other 47mm cases, my focus shifts toward thickness, symmetry, and overall balance. The larger size of the case and its presence on the wrist call for a bold strap to match.

The Panerai Bronzo uses a 26mm wide strap. There’s no getting around the heft of this combination. So when I design a strap for Panerai Bronzo watches, I lean into that weight and structure. I select thick, firm leathers and build each strap to be at least 5.0mm thick on average.

The curves and slope of the Bronzo case influence everything from the taper to the buckle fit. Rather than minimize the bulk, I embrace it. Wide keepers are part of my standard Panerai Bronzo strap options. I box stitch most by hand for strength, though I occasionally use open-ended stitching depending on the leather.

I also use vintage-style stainless pin buckles, typically sewn in. These work especially well with thicker straps and allow for tighter punch spacing. For 26mm straps, I use a heavier thread and space the stitching wider than on my Radiomir or 44mm Luminor straps.

Each strap for Panerai Bronzo watches is truly one of a kind.