Green Panerai Radiomir Strap 27/22 “Verda Laguna” Sewn

Description

About the Strap:  I designed this strap specifically for Panerai Radiomir models and it measures 27mm at the lugs, tapering to 22mm at the buckle. For this build, I selected a chrome-tanned leather hide in a dark teal color tone. At 3.0mm thickness, the strap is comparable to the thickness of many OEM Panerai straps. I used a high-tensile strength French poly thread for the stitching, finished in a tone slightly lighter than the leather. The top surface of the leather is smooth, and the edges have been hand burnished to achieve a clean and consistent finish.

The strap features one floating keeper and one fixed keeper, with the buckle sewn directly into place. I added a creased edge detail along the length of the strap, while the keepers are left smooth for contrast. The circular buckle pin holes are precisely sized to match the buckle pin, creating a clean and secure fit. On the buckle side, the strap uses a reinforced stitch line at the buckle to strengthen the area that experiences the most stress, improving long-term durability.

Because of the balanced teal leather tone and slightly lighter stitching, this strap offers a subtle but distinctive upgrade that pairs well with a wide range of Radiomir case and dial combinations. Additional buckle options are available using the drop-down menu.

Shown here in 130/80 mm and paired with the PAM00992 Radiomir 8 Days.

Measurements:  This strap is 26/22, with a thickness of ~3.0mm.

Included:  Watch strap, optional buckle, one wooden gift box.

To view additional Radiomir straps, please click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

–soon–

________

Why a custom strap for your Radiomir? Ordering a bespoke Radiomir strap gives you full control over every detail. It lets the watch wear exactly the way you prefer, not a generic fit. Radiomir wire lugs are sensitive to thickness, taper, and hole spacing. A custom strap keeps the watch balanced and integrates cleanly with the case. A made-to-order strap also breaks in faster on your wrist. Its thickness, flexibility, and length are tailored to you, not an average template. For collectors, a bespoke Radiomir strap is more than a replacement part. It improves comfort, elevates the look, and gives the watch a personal presence.

Additional Information: For every Panerai model, I approach strap design with its own distinct philosophy. The Radiomir remains my long-standing favorite within the entire Panerai lineup. I bought my first Radiomir nearly twenty years ago, though I didn’t begin making straps for it until much later in life. Designing for the Radiomir is both enjoyable and technically demanding.

For larger Panerai cases around 47 mm, I typically use thicker thread with wider spacing. With the Radiomir, I vary both thread thickness and stitch density, mixing tight patterns with wider intervals. These choices always depend on the behavior of the specific leather. Most aftermarket Radiomir straps fall between 3.5 mm and 5.0 mm, with the majority landing somewhere near the midpoint.

Radiomir wire lugs work best with softer, more flexible leathers. From a design perspective, I usually taper the straps to 27/22 or 26/22, depending on how the material responds. For larger 47 mm Radiomir cases such as the PAM00323, I advise a thickness of 4.5 mm or more. I’ve also produced bolstered-taper designs for these 47 mm Radiomir models.

Please contact me before placing an order for a custom Radiomir strap. I’m always glad to help guide the selection. I take pride in every aftermarket Panerai strap I build, each crafted entirely by hand without templates or machines. As a result, no two handmade straps are ever perfectly identical.