Green Panerai Strap 47mm 26/26 “Verde Laguna” Flat

Description

About the Strap: This is a unique strap for the 47mm Panerai case. For this build, I selected a chrome tanned leather hide in a dark teal color tone. At 3.0mm thickness, this strap will be similar in thickness to many OEM straps. I have selected a high tensile strength French poly thread for the stitching. The stitching is one tone lighter than the leather. The top side of the leather is smooth, and I have hand burnished the sides to a consistent finish.

I designed this strap with one floating and one fixed strap keeper. The buckle is sewn in place. I’ve added a crease to the edges of the strap while the keepers are left smooth. The circular buckle pin holes perfectly match the width of the buckle pin for a precise fit. The strap features a mid-fold design on the buckle side for long lasting durability.

Thanks to the neutral color and stitching tones, this strap is a subtle yet unique upgrade to nearly any case or dial color. You may select from additional buckle options using the drop down menu. The strap measures 26mm wide throughout.

Displayed here with the PAM00372.

Measurements:  This strap is 26/26 wide, with a thickness of ~3.0mm.

Included:  Watch strap, stainless pin buckle (sewn), one wooden box with papers.

To view more 26mm Panerai straps, click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

–soon–

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather I am working with, more so than with Radiomir or 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap. There is no escaping the mass of this case and strap combination. My designs for this case take into account several features, including the arches, curves, angles, and degrees of slope of the case and buckle. Instead of stepping away from or minimizing the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like to make the strap keepers wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open-ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage-style stainless pin buckles that are sewn in place. These pin buckles work especially well for thicker straps. Vintage-style Panerai pin buckles also allow for narrower buckle holes. What’s more, for these 26mm-wide straps, I mostly employ thicker thread with a larger stitching margin. I adjust stitch spacing to be slightly wider than on my 44mm or Radiomir straps.

I perform the entire process by hand without templates or machines. Finally, as a result of the handmade nature of these straps, no two are identical.