Blue Panerai Luminor 47mm Leather Strap 26/26 “Atlas V2”

Description

About the Leather:  This blue Panerai strap is handcrafted for 47mm Luminor models with large cases. It balances everyday durability with a clean, utilitarian look. The stain-resistant leather has a medium-soft temper and wears comfortably from day one. A semi-matte finish suits both tool-watch use and more refined settings.

Cut at a full 26mm from lug to buckle, the strap keeps a bold, purposeful stance that pairs naturally with larger Luminor cases. The consistent 4.2mm thickness adds structure without feeling stiff, allowing the strap to sit flat against the case and wear naturally on the wrist. Hand-creased edges run the full length of the strap, while gray stitching adds subtle contrast without overpowering the blue leather.

A flat GPF-style pin buckle is sewn in place for a secure, period-correct look. Two matching keepers—one fixed and one floating—keep the fit stable throughout the day.

Supple from the start, the strap breaks in quickly while resisting stains and visible wear. It holds its shape over time and is finished with careful detailing. A no-nonsense upgrade for modern and classic 47 mm Luminor models. Shown here with the PAM00372.

Measurements:  This strap is 26/26, with a thickness of ~4.2mm.

Included:  Watch strap, stainless pin buckle (sewn), one wooden box with papers.

To view more  26mm Panerai straps, click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather that I am working with; more so than with Radiomir or even 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap. There is no escaping the mass of such a case and strap combination. My designs for this case take into account several features of the 47mm cases including the arches, curves, angles, and degrees of slope of not just the case, but the buckle as well. Instead of step-in away from or trying to minimize the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like the make the strap keepers nice and wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage style stainless pin buckles that are sewn in place. These pin buckles work especially well for straps that are thicker. Vintage style Panerai pin buckles also allow for more narrow holes for the buckle. Whats more, for these 26mm wide straps I mostly employ thicker thread with a larger margin in the stitching. I adjust spacing between stitches to be slightly wider than on my 44mm or Radiomir straps.

I perform the entire process by hand without templates or machines and use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades. Finally, as a result of the hand made nature of these straps, no two are identical.